Pneumatic Services, Inc.

LINKS

D & E Size cylinder transport carts

These lightweight, electrically welded carts are constructed of high tensile strength steel which offers greater durability where portable oxygen units are required. While used in hospitals, federal institutions, and private homes, these carts feature large, quiet, easy rolling wheels, mask hook, non-slip hand grips and optional color coating for identification purposes upon request.

TOP OF PAGE

ALL MODELS AVAILABLE IN CHROME PLATING OR ENVIRONMENTALLY SAFE COLOR COATINGS.

WHEN SPECIFYING CHROME, ADD "C" AFTER THE FIRST NUMBER
(FOR EXAMPLE: 6C105)

Deluxe D & E Size cylinder carts

These four-wheeled units offer better control and easy maneuverability in and out of tight spaces. They require no tilting or balancing, giving you total control over the cylinder load. Features include non-slip hand grip, mask hook and four 3" heavy-duty locking swivel casters.

small D & E size cylinder stands & Racks

Model # 610WC safely contains a D or E size cylinder which attaches to the rear of a wheelchair.

Model # 610WM is a D or E size cylinder wall bracket that can be mounted to a crash cart or any solid surface.

Model # 610H is a D or E size cylinder stand designed to stand alone, be hand carried laid down or hung on a gurney or wall for emergency applications.

Model # 610WC-IV is a combination cylinder holder and I.V. Pole for standard wheelchair applications. The patented tracking system enables the operator to adjust the pole from 36" to 58" with ease.

610H
Height: 14"   Depth: 5"
Width: 5"   Weight: 4 lbs.

610WC-IV
Height: 48"   Depth 5"
Width: 5"   Weight: 9 lbs.

Layered D & E Cylinder carts

LC25-4
Height: 40"   Depth: 32"
Width: 27"   Weight: 105 lbs.
Cylinder Capacity: 25
Caster Diam: 5" w/Brake

Layered D & E cylinder carts and racks designed for easy storing of full and empty cylinders in the unit. Constructed of heavy gauge square tubing, round bar, large 4" swivel casters w/locks, and convenient full length push handles. These specially designed shelves are dirt and dust collection free and when moisture is present these shelves allow for free air flow drying.

Multiple M6 size cylinder carts & stands

Newly developed and much needed M6 carts and stands are designed for multiple cylinder transport  and storage. The all-welded construction of heavy-duty angle iron, round bar, and solid bottom pan insures greater durability and strength. Individual spacing, positive cylinder placement and weight distribution gives these units the right formula for safe handling.

cylinder carts for clean room use

These single and dual cylinder carts shown below are designed to transport high pressure cylinders in a clean room environment. They feature newly designed longer handles for ease of mobility, large non-marring 10" wheels, chrome plated finish and bright plated safety chain.

All clean room service carts have a polished chrome finish with large non-marring 10" plastic hub/rubber tired wheels with plain bearings that are not greased or oiled.

Magnetic Resonance Imaging – These all stainless steel carts and rack designs have been tested inside a Phillips 1.5 Tesla Magnet (MRI unit in a major California hospital) with no attraction to the coil.

cylinder wall brackets & bench mounts

Holds 7" to 9½" diameter cylinders.
These single and double wall mount cylinder holders are designed to be bolted to the wall and feature either heavy-duty nylon belting with quick release spring loaded nickel plated buckles or bright plated safety chain.

All models available in chrome plating or environmentally safe color coatings. When specifying chrome, add "C" after the first number (ex: 6C10W)

LARGE H & T size cylinder carts

Model # 6114 and 6214 are single and dual cylinder carts recommended for the transport and handling of large cylinders. They feature newly designed longer handles for ease of mobility, large 10" front wheels and 4" rear casters for better maneuverability over rough or uneven surfaces. These units also come equipped with the newly designed and patented rear wheel retractable assembly. (Simply extend the rear wheel mechanism into it's locked position, tilt back and use.) Model # 6114R is equipped with a stationary rear wheel assembly that is not retractable.

6114
Height: 46"   Depth: 15"
Width: 15"   Weight: 30 lbs.
Wheel Diam: 10" x 1.75"
Solid Rubber
Caster Diam: 4" x 1" Swivel
Cylinder Capacity: 1

6114-R
Height: 46"   Depth: 28"
Width: 15"   Weight: 30 lbs.
Wheel Diam: 10" x 1.75"
Solid Rubber
Caster Diam: 4" x 1" Swivel
Cylinder Capacity: 1

6214
Height: 46"   Depth: 15"
Width: 25"   Weight: 41 lbs.
Wheel Diam: 10" x 1.75"
Solid Rubber
Caster Diam: 4" x 1" Swivel
Cylinder Capacity: 2